slider_img slider_img slider_img slider_img slider_img slider_img slider_img slider_img



HOSPITAL O.T. TABLE

SURGICAL OPERATION TABLE HYDRAULIC MAJOR HEAD END CONTROL

Product Code : KANJI-517

This is a latest design head end control operation Table suitable to perform all operation positions such as abdominal, thyroid, gall bladder, kidney, neurosurgery, plastic surgery etc by obtaining flex, reflex, lateral tilt, trendlenburg, reverse trendlenburg and chair positions by sitting at the head end side of the table.

Sturdy and heavy duty base covered with S.S. Sheet for durability of table.
Single action double cylinder hydraulic pump which can be raised to minimum & Maximum height as mentioned in specification.It can be obtain by foot paddle.
Five section S.S. Top, with detachable legend section.
All the positions can be maneuvered from head end side by moving the handle as mentioned on the indicator Dial.

STANDARD ACCRESSORIES
Anaesthetic Frame, Padded Side Supports, Intravenous Arm board, Padded Shoulder Supports Wristlets, A pair of knee cratches, Footrest with SS top, Lateral Side Supports, Kidney Bridge, Water proof Rubber Mattress.
 
OPTIONAL ACCESSORIES
S.S. Tray bracket for Instruments, Permeable Tops for X-ray Cassetts., Neuro Surgery Accessories, Ortho Attachment.
 
TECHNICAL DATA
Length of the table top : 180 to 195 cms.
Width of the table top  : 50 cm.
Minimum height          : 75 ± 5 cm.
Maximum height         : 95 ± 5 cm.
Hydraulic Lift             : 20 cm.
Lateral Tilt both side    : 20º ± 2º
Flex                         : 900
Reflex                      : 2200 
Longitudenal Tilt         : 30º + 1º


SURGICAL OPERATION TABLE HYDRAULIC SIDE END CONTROL

Product Code : KANJI-518

A Single Action Twin concealed cylinder Hydraulic pump Controlled by a Foot pedal. Fully S.S. covered base mounted on Heavy duty Castors with auto floor locking system. The Detachable leg, section provides easy Lithotomy positioning, Five Section S.S. Top with large perineal cutout for 
drainage tray, built in Kidney bridge. The Improved Hydraulic System provides smooth movement and the speed of lowering the table is permanently set. The table is finished with extra hard, permanent finish Oven baked paint and all the accessories are bright Chromium plated.

STANDARD ACCRESSORIES
▪  Anaesthetic Frame, 
▪  Padded Side Supports,
▪  Intravenous Arm board, 
▪  Padded Shoulder Supports
▪  Wristlets 
▪  Lithotomy Leg Holder with straps. 
 
OPTIONAL ACCESSORIES
▪  Water proof Rubber Matress
▪  Radio-graphic Top
▪  Neurosurgical Attachment
▪  Geopel type Lithotomy Crutches with straps
▪  Orthopaedic attachement
▪  Footrest with S.S. Top
 
TECHNICAL DATA
Length of the table top : 180 to 195 cms.
Width of the table top  : 50 cm.
Minimum height          : 80 ± 5 cm.
Maximum height         : 95 ± 5 cm.
Hydraulic Lift             : 20 cm.
Lateral Tilt both side    : 20º ± 2º
Flex                         : 900
Reflex                      : 2200 
Longitudenal Tilt         : 30º + 1º

 


OPERATION & EXAMINATION TABLE TABLE (HI-LO)

Product Code : KANJI-519

(72" x 20" x 32")
Tubular Frame work on 10 cms castors with brakes. This is anexceptionally fine surgical table. With facility of hight adjustment by cranck mechanism. Offering a very comprehensive range of positions viz, "straigh",trendlenburg & reverse trendlenburg positions, chair, lithotomy position etc.
Note: Mattress at extra cost.


OBSTETRIC LABOUR TABLE TELESCOPIC (FIXED HEIGHT)

Product Code : KANJI-522

Approx. Dimensions : 72"L x 27"W x 30"H. Tubular frame work mounted on PVC stumps. Stainless steel top in three sections. trendlenburg positions adjustable on ratchet. Leg end section can slide under the main section. Height adjustable a pair of knee crutches. Pre treated & Epoxy powder coated.
Also available in complete Strainless Steel.


OBSTETRIC DELIVERY TABLE (3 SECTION TOP) 526

Product Code : KANJI-526

Approx. Dimensions : 72"L x 22"W x 30"H., Rectangular & Square tube frame work mounted on PVC stumps. Three Section  cushioned top. Backrest , Set, Leg section adjustable by hand lever. Complete with SS bowl, Height adjustable a pair of knee crutches. Pre treated & Epoxy powder coated.


 


EXAMINATION TABLE (2 SECTION) DELUXE

Product Code : KANJI-528

Approx. Dimensions : 72"L x 24"W x 32"H., Frame work Rectangular & Square CRCA tubes. Adjustable Back Rest by hand lever. 2 Section Cushioned top. Legs fitted on PVC stands. Pre - treated & epoxy Powder Coated.


GYNAEC EXAMINATION TABLE (BACK REST) DELUXE

Product Code : KANJI-530

Overall SIze : I SOL x 60W x 46Hcms. frame work made of Rectangular / Square CRCA Tube Back rest section adjustable on Ratchet / Lever Legs fitted with PVC Stumps %cm foam cushioned top covered with rexine with perineal cut Adjustable lithotomy poles withstraps. Finish : Epoxy Powder Coated.